Carpet Cleaning Process

The carpet cleaning process you follow determines the final outcome. I mean, what is more fulfilling than going back home to a clean and fresh house? A clean carpet boosts your home’s appearance and improves your health by reducing dust and other allergens that might cause an allergic reaction.

Carpet Cleaning Process

There are different approaches to clecarpet cleaning processaning your carpet, depending on how messy it is. Below is a comprehensive guide you can follow to achieve your desired level of cleanliness.

Inspect Your Carpet

You need to inspect your carpet to assess the degree of dirt you are dealing with and determine the type of detergents to be used. Identify the problem areas where you will pay more attention to during the cleaning process.

Protect the Surface

Before starting out on the whole process, make sure to protect all the surfaces in your house. This includes floors, walls, and corners. You don’t want the cleaning damaging them.

Vacuum Your Carpet

For exceptional results, vacuum forward and backward, left and right. By doing so, you are sure to thoroughly clean each fiber. How often you should vacuum your carpet is dependent on factors such as whether you own a pet or not, whether you have kids or not, and whether you have regular visitors or not. Basically, you should clean your carpet whenever it accumulates dirt as a basic vacuuming tip.

Spot Cleaning

Identify all stains such as pet stains, food, tomato and wine stains and more left after vacuuming and use your favorite detergent to get rid of them. In this step, you are required to use a white cloth since colored ones might transfer their color to your carpet. Avoid using brushes, they can damage the carpet fibers.


Depending on your carpet type and degree of dirt, apply a pretreatment emulsifier. This helps to get rid of invisible stains and odor trapped in between the fibers. It is advisable to use non-toxic products that won’t damage the fibers.


Use a brush machine to get rid of stubborn grease lodged inside carpet fibers. Ensure that you use a soft brush to avoid damaging your carpet.


This method is recommended for specific carpet types. It involves the use of steam, followed by a rinse with 210-degree hot water. This step thoroughly cleans your carpet. You can also look into other technological methods to clean your carpet such as carbonated carpet cleaning

Post Spotting

This step is meant to clear any stubborn stains left behind after cleaning your carpet. You can, however, skip it if your carpet looks clean enough.

Carpet Protection

This step is optional but important. It helps your carpet maintain its original stain resistance capacity, making it look good as new. Always apply a carpet protector after every wash.


To promote faster drying, use high-velocity air movers. Apart from drying fast, your carpet won’t re-spot; retaining its sparkle till it dries up. If you have no access to air movers, laying it out to dry in the sun will do as well.

Bottom Line

The carpet cleaning process can be cumbersome and time-consuming. However, doing it over and over again makes it easier. If you are always busy and can’t find time to clean your carpet, you might consider having a professional to do it for you.

Best Way to Wash Carpets

Carpets need a deep cleaning to maintain the look and performance for long. A clean carpet can be effective to improve indoor air quality. If you have young kids and pets, then you will have to clean your carpets more frequently to maintain the cleanliness. It is not easy to deep clean a carpet.  Without knowing the proper tricks, your hard efforts are not going to help you much. To help you out here is the best way to wash carpets. You do not need to use strong chemicals to deep clean your carpet while following this procedure.

Best Way to Wash Carpets


How to Clean Your Carpet

As stated earlier, you do not need to use cleaning products and chemicals to clean your carpet.  Chemicals might be the best choice. But they can harm your carpet fibers and cause risk to your family if they are sensitive to some ingredients used in the products. You can consider a natural cleaning method to avoid all these. You can try the following natural method.



You will need dish soap, water, vinegar, and club soda to deep clean your carpets. All these products will be available in most homes. Therefore, you can start cleaning without visiting a shop to buyBest Way to Wash Carpets all these ingredients.



  •     Get vinegar, water, and dish soap. Take one tablespoon of the warm water and equal part of dish soap. Mix them well and then add ¼ teaspoon of the white vinegar. Your carpet cleaner is ready. This homemade cleaner is effective to deep clean your carpet. Before using it to clean your carpet, you should first try on a small area to know the effect. If it works well, you can try on other areas of your carpet. You can apply it to remove the stains as well.


  •     Club soda will work as a deep cleanser. You can use it to remove wine and blood stains.   You can simply spray it on your carpet to remove the stain. Take a small amount and then apply it on the stain. Now take a paper towel or a dry cloth to blot the stain. Keep trying until the stain is completely removed.


After removing stains from your carpet, you can wash it to ensure proper cleaning. If you wash your carpet, it will remove all the dirt and debris and will improve your indoor quality. Simply washing in water will not serve the purpose. Instead, you can prepare a solution using warm water and a few drops of liquid soap.  You should choose the one that is non-toxic but powerful enough to offer a deep cleaning and to remove dirt and debris. While washing your carpet with this solution, use a clean cloth to scrub the carpet and also use a dry towel to blot the stains and surface. This Best Way to Wash Carpetssimple way will help you to wash your carpet thoroughly.


This is the best way to wash carpets. However, if you are not satisfied with the result or your carpet condition is terribly bad, you can take the help of the professionals.

How to Remove Soap Residue from Carpets?

You need soap to get rid of virtually all types of dirt. But what happens when the dirt you’re trying to get rid of is (gasp!) soap? Because spilled soap can be a double-edged sword, in that the thing that makes it so great at taking out dirt – the foam – can be annoying when it sticks to a surface, especially on difficult-to-clean surfaces like carpets.

If the soap is wet, an easy way to get it off your carpet is with a vacuum. But you’ll need the right type of vacuum cleaner (wet/dry vacuum), with the right nozzle. If you can’t take this vacuum cleaning short cut, then keep reading.

Dependable Carpet Care insists, regardless of how the soap got there, you can’t just ignore it, and hope it will clean itself out. It’ll just attract more dirt (resoiling), which will suck in the long run.

Why Do You Have Soap Residue?

It’s not uncommon to find that a spot you thought was dealt with keeps “coming back”. One of the main culprits is that the last time you had your carpet washed, you or the cleaners didn’t wash or flush out all the soap. So it keeps coming back.

The bad news is that it will keep returning until it is adequately dealt with. That’s why it’s better to sometimes take matters into your own hand – cause you know exactly where the soap spot is.

Moreover, getting cleaners to do it might just cost you unnecessarily, cause you know they’ll charge you for the whole carpet. To be prudent, here’s how you can get that soap residue off your carpet. Hint, its hard work, so buckle up.

Removing Soap Residues From Carpet – DIY

How to Remove Soap Residue from Carpets● Depending on the severity of the soap residue, you may want to get a defoaming agent. Add that to plain water and use it to clean the affected area, it will drastically reduce the number of times you have to rinse.

● For the defoaming agent, you can try diluted vinegar (first do a test on a small potion of your carpet to see how the carpet reacts to vinegar).  Vinegar also kill bacteria and delays mildew growth which is great. If vinegar doesn’t work, there are tons of defoaming agents sold in DIY supplies sections at grocery stores.

● Actually getting the residue out mostly involves rinsing the affected area, again and again until all the suds are out. Try not to use too much water though, otherwise you’ll have brand new problems of your own (carpet itself or floor beneath the carpet might become damaged).

● Thoroughly dry out the affected area with a towel.

● Train a fan on the towel dried area, or switch on the air conditioner so that the carpet dries very fast. You’ll want it to dry in less than 24 hours so that mildew and moss won’t start growing.

Bottom Line?

How to remove soap residue from carpets, unfortunately There isn’t a magic trick to getting soap residue off your carpet. If you don’t have a dual function vacuum cleaner, repeatedly rinsing the affecting area is a tried and trusted method. And if you use a defoaming agent, you’ll be done much faster.